Dana Drive Axle Application Guide

Approximately the same pinion diameter as a dana 60, mass availability. Gt = net driveline torque at 25% gradeability rr = tire rolling radius (in) gvw = gross vehicle weight (lbs)

Gear ratio chart for tires TIRES Pinterest

Restoration don't let that old classic rot away in the garage.

Dana drive axle application guide. Wherever limits are pushed, dana is there. Put carrier on guide pins; Choose an eaton performance differential to reduce wheel slippage and ensure domination from the green light to the finish line.

One function is to seal the joint so the lubricant in the drive axle and hub does not leak. Maximum tire size for stock axle: Under application guidelines on page 6.

Differential application guide eaton performance products 7 drag racing vehicles that run on the quarter mile have unique demands. Shift axle to high range so fork is remove existing shift unit. Fitting gladiators with 0 to 6 inch lifts these shafts yield better balance, greater strength and less vibration than other aftermarket alternatives.

Drive axle gaskets hardware helical gears sealant and adhesives seals shims and spacers Application guidelines on page 8, and for ten series using the driveline sizing graph. The second function is to transfer the

Remove shift unit and rubber boot. Spicer performance driveshafts for the jeep gladiator have been specifically designed off road punishment. All front drive steer axles and transfer case applications must be submitted to meritor for approval.

Over 60 pounds (27.2 kg) lighter than its predecessor, this tandem axle is lightweight without compromising performance and durability. The spicer light vehicle product line includes front and rear axles, differential systems, and more. • to carry the load.

The drive axle must be designed with strength capable of withstanding the punishment of a loaded truck in operation. And for the first time, you can also get genuine dana™ axles for your light vehicle applications through the dana crate axle™ program. Servicing other electric system components

Align the splines of the output shaft to the output side gear Its versatility make the detroit truetrac the ideal traction solution for almost any type of vehicle. Today, that has changed thanks to international’s major design failure with the 6.0l diesel engine in superduty ford trucks.

Drive axle shaft to drive hub gasketed joint failure high torque applications can cause field failures of the drive axle shaft to hub joint. Dana axles have been used by all of the big oems at one point or another, including to this very day. Dana corporation is a very large oe and aftermarket supplier of axles and driveline components.

For more on ranger rear axles click here. Spicer 141 axle designed for class i, iv, and v industrial lift trucks, the spicer 141 axle is a scalable, modular platform built for heavy loads while offering durability. All meritor drive axle models must not operate in conditions when axle oil temperature exceeds 250˚f (121˚c).

Drop card over shift unit as shown remove and discard seal and spring. High angle (45°) interaxle driveshafts are available in spl170, spl250 and 1710 series only. This joint has two major functions.

Focal mounted telma retarders can be approved for single axles only. In most instances, the drive axle. Groups axle application guide click lees meer.

diesel brothers obs 2.0 Google Search Things I love